Offcanvas Section

You can publish whatever you want in the Offcanvas Section. It can be any module or particle.

By default, the available module positions are offcanvas-a and offcanvas-b but you can add as many module positions as you want from the Layout Manager.

You can also add the hidden-phone module class suffix to your modules so they do not appear in the Offcanvas Section when the site is loaded on a mobile device.

Friday, December 27, 2024

Production Abrasives Engineering Abrasive Solutions

Call Toll Free: 800.784.6572

Industrial Abrasive Products

Splices


Sanding Belt Splices

STANDARD BUTT SANDING BELT SPLICE 

This is our standard sanding belt splice for narrow cloth and paper belts unless otherwise specified. The ends of the belt are butted together and joined on the under side with high strength tape. This allows the belt to run smoothly in either direction. Various tapes are used depending on the grit of the belt and the application involved. Standard tape width is 3/4", but 1" is also used on certain operations.

prolap2PRO-LOK SANDING BELT SPLICE

Pro-Lok is similar to our standard butt splice, except the ends of the belt are cut and joined in a zig-zag configuration. This also allows the belt to run smoothly, without hinging, in either direction. This is our standard splice for glass belts, Value Line portable belts, surface conditioning belts (1"-16"), and belts for Hetran type machines.

LAP SANDING BELT SPLICE

For a Lap splice, grain is removed from www.avalonpharmacy.com the top of one of the belt ends and the ends are overlapped. This is used on cloth belts, only if specified. No grain is removed from the top of the splice, however this can be partially removed as required.

 

prolap2

PRO-LAP SANDING BELT SPLICE

This is a very narrow (5/16"), smooth running splice for paper belts (narrow or wide). This is used in critical operations, where tape joints can leave a mark on the material. This splice is smooth enough to be run bi-directional.


prolap2PRO-FORM SANDING BELT SPLICE

This splice actually has the tape on the face of the belt. This allows a bump free operation on very conforming wood applications where a non-marking finish is critical.


prolap2SCALLOPED EDGE BELTS

This zig-zag effect on the side of the belt allows the belt to conform quickly and easily to intricate configurations. This is most effective for final polishing and finishing operations on metal. There is an additional 5% charge for belts produced in this manner.